Wire Drawing Machine
This is the equipment to draw the wire which is pointed by a wire pointer through dies.
▼ Skip Feed Type Wire Drawing Machine
▼ Gravity Type Wire Drawing Machine
▼ Accumulative Type Continuous Wire Drawing Machine
▼ Straight Line Continuous Wire Drawing Machine
▼ Peeling Type Wire Drawing Machine
▼ Roller-dies Type Wire Drawing Machine for inline use of Washer Making Machine
▼ Take up Machne
Skip Feed Type Wire Drawing Machine
About
The wire drawing machine equipped skip feed is called skid feed type wire drawing machine.
Skip Feed Type Wire Drawing Machine Specification | |||||
Model | CSD-900SF-H | CSD-900SF | CSD-760SF | CWD-600/450SF | |
Drum diam.(㎜) | 900 | 900 | 760 | Upper Drum 600 | |
Lower Drum 450 | |||||
No. of Die | 1 | 1 | 1 | 2 | |
Inlet wire diam/<(Max.)>(㎜) | Hard Steel | 18.0 | 14.0 | 12.0 | 5.5 |
Mild Steel | 25.0 | 19.0 | 14.0 | 6.5 | |
Finished wire diam.(㎜) | Hard Steel | 6.0~16.0 | 6.0~12.0 | 5.0~10.0 | 3.0~5.0 |
Mild Steel | 8.0~22.0 | 8.0~18.0 | 6.0~12.0 | 3.0~6.0 | |
Drawing speed 3-step(M/min.) | Hard Steel | 30,,43,60 | 30,43,60 | 30,43,60 | 40,55,80 |
Mild Steel | 45,63,90 | 45,63,90 | 45,63,90 | 60,84,120 | |
Motor | 75 | 37~55 | 37~45 | 30~37 | |
Coil diam.(mm) | 900~1,200 | 900~1,200 | 760~1,000 | 600~760 | |
Net weight(abt.) ton | 10.0 | 8.5 | 7.0 | 4.5 | |
Gross weight(abt.) ton | 12.0 | 10.0 | 8.5 | 5.5 | |
Measurement(abt.) ㎥ | 25.5 | 20.0 | 17.0 | 11.5 |
Gravity Type Wire Drawing Machine
About
Option
Auto-chuck built-in the drum, Auto-chuck device built-in the drum
Accumulative Type Continuous Wire Drawing Machine
About
This type is mainly used for thin wire (dia. 1.5 – 7.0mm) and used for continous wire drawing machine consisting of several blocks.
MODEL CSD(SINGLE-DECK) STANDARD SERIES SPECIFICATION | |||||||
Drum diam. | 300 | 400 | 450 | 600 | 710 | 760 | |
Inlet wire diam.<(Max.)>(㎜) | Hard | 3.00 | 4.50 | 6.35 | 8.00 | 9.00 | |
Mild | 3.60 | 5.50 | 7.00 | 10.00 | 12.00 | ||
Motor power(KW) | 7.5~11 | 15~22 | 22~37 | 22~37 | 37~45 | ||
Net weight(abt.)(t) | 1.25 | 2.5 | 3.6 | 5.7 | 7.5 | ||
Gross weight(abt.)(t) | 1.55 | 2.9 | 4.2 | 6.4 | 8.5 | ||
Measurement(abt.)(㎥) | 3.8 | 6.5 | 9.8 | 12.5 | 16.5 |
MODEL CWD(DOUBLE-DECK) STANDARD SERIES SPECIFICATION | ||||||||||||
Deck Type | Upper Drum | Lower Drum | Upper Drum | Lower Drum | Upper Drum | Lower Drum | Upper Drum | Lower Drum | Upper Drum | Lower Drum | ||
Drum diam. | 300 | 230~250 | 400 | 450 | 320~370 | 600 | 480~430 | 710 | 570~530 | 760 | 610~570 | |
Inlet wire diam.<(Max.)>(㎜) | Hard | 2.60 | 3.60 | 5.50 | 7.00 | 8.00 | ||||||
Mild | 3.20 | 4.50 | 6.35 | 9.00 | 10.00 | |||||||
Motor powor(KW) | 11~15 | 18.5~22 | 30~37 | 37~45 | 45~55 | |||||||
Net weight(abt.)(t) | 1.25 | 2.5 | 3.6 | 5.7 | 7.5 | |||||||
Gross weight(abt.)(t) | 1.55 | 2.9 | 4.2 | 6.4 | 8.5 | |||||||
Measurement(abt.)(㎥) | 3.8 | 6.5 | 9.8 | 12.5 | 16.5 |
Option
Automatic controling accumulated volume.
Straight Line Continuous Wire Drawing Machine(Dancer Type or Inclined Shaft Small Dancer Type)
About
Straight Line Continuous Wire Drawing Machine Standard Series Specification | |||||
Model | CSD-600S | CSD-550S | CSD-450S | CSD-300S | |
Drum dia.(㎜) | 600 | 550 | 450 | 300 | |
Inlet wire | Nature | High carbon steel, Stainless steel, Alloy steel etc. | |||
Max.dia.(mm) | 7.0 | 5.5 | 4.5 | 3.0 | |
Finished wire | wire dia. | 4.0~1.4 | 3.5~1.2 | 2.0~0.8 | 1.0~0.5 |
delivery | Dead block, Gravity type drawing machine, Stripper, Spooler etc. | ||||
Motor Power(kW) | 30~37 | 22~37 | 15~22 | 7.5~15 | |
Speed Control System | Speed change by Invertor | ||||
Machine weight(㎏) | 2,800 | 2,000 | 1,800 | 1,300 | |
Sipping weight(㎏) | 3,200 | 2,400 | 2,100 | 1,500 | |
Box Measurement(㎥) | 5.8 | 5.45 | 5 | 4.2 |
* As machine speed depends on wire material, we disccus with each customer.
* We can provide bigger diameter drums than above mentioned size.
■Method for taking up finishing wire
As far take-up method for finished wire, we discuss with customers and can select the best way in accordance with wire material.
・Gravity Type Take up Machine(with lifting equipment)
・Gravity Type Take up Machine(turn table & wire coil stand type)
・Spooler Bobbin Type
・Dead Block Type
・Stripper Type
・Non Stop Coiler Type
Peeling Type Wire Drawing Machine
About
This is the equipment to take scratch off the wire.
Roller-dies Type Wire Drawing Machine for inline use of Washer Making Machine
About
Number of steps and drum diameter are disccused with customers.
Take up Machine
Skip-feed Type Take-up Machine (SF): Arranging take-up coiling diameter by skip roll
Dead Block Type Coiler(TNCD, TNC) : Stop turning the drum in stem wire coil stand
About
When changing the winding coil stand, this wire guide is pulled up from the upper side.
Option
Pattern Winding
Non Stop Coiler (TNA TN) : (Drum does not turn because of using planetary gear)
About
This type wire guide does not turn because of planetary gear. Because wire guide is away from the wire coil stand, and the load is not given to the wire coil stand, it is not neccesary to lower the wire guide.
Option
Pattern Winding
Gravity Type Coiler(TNV) : Drum does not turn by using planetary gear mechanism.
About
This is the type of not turning drum.
Option
Pattern Winding
Gravity Type Winding Machine (TNR) : (Drum turning type)
About
This is the type of turning drum.
Option
Automatic cutting equipment
Plated Wire Take-up Machine(NSV) : Drum Turn Type
About
While the machine catches the drawn wire temporarily on built-in lever being put out, the winding coil stand can be changed.
Take-up Turn Table
About
Spooler (Euipment to take up by bobbin)
About
Option
Bobbin automatic change
Bobbinless spooler with mandrel for expansion and collapse
Automatic Binding Machine
About
Special Type Pattern Winding(for turning drum)
New Type! PS-760
The lever height is always controled to keep position just above wire material, which makes it possible to make stable coling accumulation.
Good shape
Coiling in order with good balance without collapse
High filling rate
Following picture shows 1 ton wire coil wound on the wire coil stand of 1,200mm height.
Become high quality product
No wire snarl like the winding by coiler
Possible to wind in high speed
Possible to speed up to 300m/min. by winding in turning table method.
Special Type Pattern Winding PS-760 Main Specification | |
Take-up motor | 5.5kw |
Take-up weight | 1 ton max. |
Take-up speed | 300m/min. max. |
Using wire coil stand | flower shape, Outer foot dia. about 900 – 1,000mm Shell dia. 400 – 600mm Height 1,200~1,500mm |
Coil diameter | about 600mm (to be consulted) |
Wire diameter | about 2 – 5mm |
*Specification is subject to change without notification. Please consult with us about specification.