Barbed Wire Machine

This is the equipment to make barbed wire using galvanized mild steel.

▼　High Speed Type：TSB-7
▼　Reverse-Twist Type : TSB-8
▼　Four coils collective type overhead wire supply stand for barbed wire machine

High Speed Type：TSB-7

About

This is the machine to make barbed wire with mild steel.
The products made by TSB-7 have wire distortion.

New type is equipped with Touch Display, which can set up number of twist on the machine panel.

TSB-7 Specification
Wire diameter	1.5〜2.8mm
No. of tensile strength	350〜500N/mm2
No. of cord wires	2
No. of barb points	2 or 4
Barb spacing	65～150mm (2.1/2 – 6″)
Rev. of bobbin cradle	640rpm max.
Rev. of crankshaft	426rpm max.
No. of barbs per min./min.	426rpm max.
Take-up coil weight	45kg max.
Drive motor	7.5kw 4p with inverter for winding section 2.2kw 4p with inverter for forming section
Brake	Pneumatic disc brake
Air requirements	1.0N. Lit/min. at 4.0kg/cm2
Machine dimension	2.5(L) x 1.3(W) x 1.7(H) m
Machine weight	about 3,400kg（7,500lb）

Reverse-twist type : TSB-8 (for high tensile wire)

About

This is the machine to make barbed wire using hard wire and mild wire.This model twists the cord wires in reverse-twist method, which alternates the twisting direction to prevent the barbed wire from distorting.
We strengthened the twist for 6 inch barb pitch, which made barb pitch stable.

TSB-8 Specification
Cord Wire Gauge		1.50～1.70mm (about T.S. 900 – 1200N/mm2)
Barb Wire Gauge		1.40 – 1.60mm (about T.S. 400 – 500N/mm2)
No. of twsits between barbs		Approx. 5 twists
Type of Barb		4-points
Barb pitch		3, 3.5, 4, 5 inch + 6 inch
No. of barbs per min. (max)		about 230 (at 3, 3.5, 4 inch)about 180 (at 5 inch + 6 inch)
Coil size	O.D	about 425mm
	I.D	about 110mm
	Height	about 210mm
	Weight	about 25kg max.
Main motor		AC7.5kw x 4p motor with brake, inverter drive
Winding motor		AC3.7kw x 4p motor, inverter drive by torque control
Machine dimension		2,730 x 900 x 1,660 (mm)
Machine weight		about 3,000kg

Four coils collective type overhead wire supply stand for barbed wire machine

About

This is wire supply stand to feed four wires as barbed wire is consisting of four wires.