Wire Drawing Machine
This is the equipment to draw the wire which is pointed by a wire pointer through dies.
▼ Skip Feed Type Wire Drawing Machine
▼ Gravity Type Wire Drawing Machine
▼ Accumulative Type Continuous Wire Drawing Machine
▼ Straight Line Continuous Wire Drawing Machine
▼ Peeling Type Wire Drawing Machine
▼ Roller-dies Type Wire Drawing Machine for inline use of Washer Making Machine
▼ Take up Machne
Skip Feed Type Wire Drawing Machine
About
The equipment to adjust the wire coil diameter of wound coil after drawing is called Skip Feed.
The wire drawing machine equipped skip feed is called skid feed type wire drawing machine.
The wire drawing machine equipped skip feed is called skid feed type wire drawing machine.
| Skip Feed Type Wire Drawing Machine Specification | |||||
| Model | CSD-900SF-H | CSD-900SF | CSD-760SF | CWD-600/450SF | |
| Drum diam.(㎜) | 900 | 900 | 760 | Upper Drum 600 | |
| Lower Drum 450 | |||||
| No. of Die | 1 | 1 | 1 | 2 | |
| Inlet wire diam/<(Max.)>(㎜) | Hard Steel | 18.0 | 14.0 | 12.0 | 5.5 |
| Mild Steel | 25.0 | 19.0 | 14.0 | 6.5 | |
| Finished wire diam.(㎜) | Hard Steel | 6.0~16.0 | 6.0~12.0 | 5.0~10.0 | 3.0~5.0 |
| Mild Steel | 8.0~22.0 | 8.0~18.0 | 6.0~12.0 | 3.0~6.0 | |
| Drawing speed 3-step(M/min.) | Hard Steel | 30,,43,60 | 30,43,60 | 30,43,60 | 40,55,80 |
| Mild Steel | 45,63,90 | 45,63,90 | 45,63,90 | 60,84,120 | |
| Motor | 75 | 37~55 | 37~45 | 30~37 | |
| Coil diam.(mm) | 900~1,200 | 900~1,200 | 760~1,000 | 600~760 | |
| Net weight(abt.) ton | 10.0 | 8.5 | 7.0 | 4.5 | |
| Gross weight(abt.) ton | 12.0 | 10.0 | 8.5 | 5.5 | |
| Measurement(abt.) ㎥ | 25.5 | 20.0 | 17.0 | 11.5 | |
Gravity Type Wire Drawing Machine
About
This is the wire drawing machine which winds the wire for mainly thick wire diameter and take out drawn wire as it is to lower direction.
Option
Auto-chuck built-in the drum, Auto-chuck device built-in the drum
Accumulative Type Continuous Wire Drawing Machine
About
As the large amount of drawn wire can be accumulated in the drum, this is high cooling efficiency and high speed wire drawing machine.
This type is mainly used for thin wire (dia. 1.5 – 7.0mm) and used for continous wire drawing machine consisting of several blocks.
This type is mainly used for thin wire (dia. 1.5 – 7.0mm) and used for continous wire drawing machine consisting of several blocks.
| MODEL CSD(SINGLE-DECK) STANDARD SERIES SPECIFICATION | |||||||
| Drum diam. | 300 | 400 | 450 | 600 | 710 | 760 | |
| Inlet wire diam.<(Max.)>(㎜) | Hard | 3.00 | 4.50 | 6.35 | 8.00 | 9.00 | |
| Mild | 3.60 | 5.50 | 7.00 | 10.00 | 12.00 | ||
| Motor power(KW) | 7.5~11 | 15~22 | 22~37 | 22~37 | 37~45 | ||
| Net weight(abt.)(t) | 1.25 | 2.5 | 3.6 | 5.7 | 7.5 | ||
| Gross weight(abt.)(t) | 1.55 | 2.9 | 4.2 | 6.4 | 8.5 | ||
| Measurement(abt.)(㎥) | 3.8 | 6.5 | 9.8 | 12.5 | 16.5 | ||
| MODEL CWD(DOUBLE-DECK) STANDARD SERIES SPECIFICATION | ||||||||||||
| Deck Type | Upper Drum | Lower Drum | Upper Drum | Lower Drum | Upper Drum | Lower Drum | Upper Drum | Lower Drum | Upper Drum | Lower Drum | ||
| Drum diam. | 300 | 230~250 | 400 | 450 | 320~370 | 600 | 480~430 | 710 | 570~530 | 760 | 610~570 | |
| Inlet wire diam.<(Max.)>(㎜) | Hard | 2.60 | 3.60 | 5.50 | 7.00 | 8.00 | ||||||
| Mild | 3.20 | 4.50 | 6.35 | 9.00 | 10.00 | |||||||
| Motor powor(KW) | 11~15 | 18.5~22 | 30~37 | 37~45 | 45~55 | |||||||
| Net weight(abt.)(t) | 1.25 | 2.5 | 3.6 | 5.7 | 7.5 | |||||||
| Gross weight(abt.)(t) | 1.55 | 2.9 | 4.2 | 6.4 | 8.5 | |||||||
| Measurement(abt.)(㎥) | 3.8 | 6.5 | 9.8 | 12.5 | 16.5 | |||||||
Option
Automatic controling accumulated volume.
Straight Line Continuous Wire Drawing Machine(Dancer Type or Inclined Shaft Small Dancer Type)
About
No Distortion Type Continuous High Speed Wire Drawing Machine.
| Straight Line Continuous Wire Drawing Machine Standard Series Specification | |||||
| Model | CSD-600S | CSD-550S | CSD-450S | CSD-300S | |
| Drum dia.(㎜) | 600 | 550 | 450 | 300 | |
| Inlet wire | Nature | High carbon steel, Stainless steel, Alloy steel etc. | |||
| Max.dia.(mm) | 7.0 | 5.5 | 4.5 | 3.0 | |
| Finished wire | wire dia. | 4.0~1.4 | 3.5~1.2 | 2.0~0.8 | 1.0~0.5 |
| delivery | Dead block, Gravity type drawing machine, Stripper, Spooler etc. | ||||
| Motor Power(kW) | 30~37 | 22~37 | 15~22 | 7.5~15 | |
| Speed Control System | Speed change by Invertor | ||||
| Machine weight(㎏) | 2,800 | 2,000 | 1,800 | 1,300 | |
| Sipping weight(㎏) | 3,200 | 2,400 | 2,100 | 1,500 | |
| Box Measurement(㎥) | 5.8 | 5.45 | 5 | 4.2 | |
* As machine speed depends on wire material, we disccus with each customer.
* We can provide bigger diameter drums than above mentioned size.
■Method for taking up finishing wire
As far take-up method for finished wire, we discuss with customers and can select the best way in accordance with wire material.
・Gravity Type Take up Machine(with lifting equipment)
・Gravity Type Take up Machine(turn table & wire coil stand type)
・Spooler Bobbin Type
・Dead Block Type
・Stripper Type
・Non Stop Coiler Type
Peeling Type Wire Drawing Machine
About
Ordinary wire drawing machine makes the wire thin through dies, but peeling type wire drawing machine makes the wire thin by peeling off the wire surface.
This is the equipment to take scratch off the wire.
This is the equipment to take scratch off the wire.
Roller-dies Type Wire Drawing Machine for inline use of Washer Making Machine
About
This is the wire drawing machine making the cross section of the wire into trapezoid shape for spring washer.
Number of steps and drum diameter are disccused with customers.
Number of steps and drum diameter are disccused with customers.
Take up Machine
Skip-feed Type Take-up Machine (SF): Arranging take-up coiling diameter by skip roll
Dead Block Type Coiler(TNCD, TNC) : Stop turning the drum in stem wire coil stand
About
In case of drawing the wire by using this coiler, a wire coil stand is put under the wire guide(shown as per picture) because the power to clockwise direction is given to the wire guide.
When changing the winding coil stand, this wire guide is pulled up from the upper side.
When changing the winding coil stand, this wire guide is pulled up from the upper side.
Option
Pattern Winding
Non Stop Coiler (TNA TN) : (Drum does not turn because of using planetary gear)
About
This coiler is connected with the drum through planetary gear from rotaty. When the rotary makes one turn, the drum makes one turn to reverse direction. This coiler has mechanism to make the drum stand still relatively.
This type wire guide does not turn because of planetary gear. Because wire guide is away from the wire coil stand, and the load is not given to the wire coil stand, it is not neccesary to lower the wire guide.
This type wire guide does not turn because of planetary gear. Because wire guide is away from the wire coil stand, and the load is not given to the wire coil stand, it is not neccesary to lower the wire guide.
Option
Pattern Winding
Gravity Type Coiler(TNV) : Drum does not turn by using planetary gear mechanism.
About
The wire is taken up to horizontal direction in non stop coiler, but it is taken up to downward direction in gravity type coiler.
This is the type of not turning drum.
This is the type of not turning drum.
Option
Pattern Winding
Gravity Type Winding Machine (TNR) : (Drum turning type)
About
The wire is taken up to horizontal direction in non stop coiler, but it is taken up to downward direction in gravity type coiler.
This is the type of turning drum.
This is the type of turning drum.
Option
Automatic cutting equipment
Plated Wire Take-up Machine(NSV) : Drum Turn Type
About
This is the equipment, whose function is similar to the gravity coiler.
While the machine catches the drawn wire temporarily on built-in lever being put out, the winding coil stand can be changed.
While the machine catches the drawn wire temporarily on built-in lever being put out, the winding coil stand can be changed.
Take-up Turn Table
About
This is turn type take up table to wind down the wire which is pre-arranged in wire drawing machine.
Spooler (Euipment to take up by bobbin)
About
This is type to take up wire on the winding core of bobbin.
Option
Bobbin automatic change
Bobbinless spooler with mandrel for expansion and collapse
Bobbinless spooler
Automatic Binding Machine
About
This is the equipment to weigh the wire which comes out of the coiler by 20kg or 40kg each and bind them with annealed wire, then discharge them automatically.
Special Type Pattern Winding(for turning drum)
New Type! PS-760
This is the equipment to wind the spirally falling drawn wire by the table. The equipment puts the lever outside the wire coil stand in order and accumulate the wire coil arranged evenly on the wire coild stand.
The lever height is always controled to keep position just above wire material, which makes it possible to make stable coling accumulation.
The lever height is always controled to keep position just above wire material, which makes it possible to make stable coling accumulation.
Good shape
Coiling in order with good balance without collapse
High filling rate
Following picture shows 1 ton wire coil wound on the wire coil stand of 1,200mm height.
Become high quality product
No wire snarl like the winding by coiler
Possible to wind in high speed
Possible to speed up to 300m/min. by winding in turning table method.
| Special Type Pattern Winding PS-760 Main Specification | |
| Take-up motor | 5.5kw |
| Take-up weight | 1 ton max. |
| Take-up speed | 300m/min. max. |
| Using wire coil stand | flower shape, Outer foot dia. about 900 – 1,000mm Shell dia. 400 – 600mm Height 1,200~1,500mm |
| Coil diameter | about 600mm (to be consulted) |
| Wire diameter | about 2 – 5mm |
＊Specification is subject to change without notification. Please consult with us about specification.