Barbed Wire Machine
This is the equipment to make barbed wire using galvanized mild steel.
▼ High Speed Type：TSB-7
▼ Reverse-Twist Type : TSB-8
▼ Four coils collective type overhead wire supply stand for barbed wire machine
High Speed Type：TSB-7
About
This is the machine to make barbed wire with mild steel.
The products made by TSB-7 have wire distortion.
The products made by TSB-7 have wire distortion.
New type is equipped with Touch Display, which can set up number of twist on the machine panel.
| TSB-7 Specification | |
| Wire diameter | 1.5〜2.8mm |
| No. of tensile strength | 350〜500N/mm2 |
| No. of cord wires | 2 |
| No. of barb points | 2 or 4 |
| Barb spacing | 65～150mm (2.1/2 – 6″) |
| Rev. of bobbin cradle | 640rpm max. |
| Rev. of crankshaft | 426rpm max. |
| No. of barbs per min./min. | 426rpm max. |
| Take-up coil weight | 45kg max. |
| Drive motor | 7.5kw 4p with inverter for winding section 2.2kw 4p with inverter for forming section |
| Brake | Pneumatic disc brake |
| Air requirements | 1.0N. Lit/min. at 4.0kg/cm2 |
| Machine dimension | 2.5(L) x 1.3(W) x 1.7(H) m |
| Machine weight | about 3,400kg（7,500lb） |
Reverse-twist type : TSB-8 (for high tensile wire)
About
This is the machine to make barbed wire using hard wire and mild wire.This model twists the cord wires in reverse-twist method, which alternates the twisting direction to prevent the barbed wire from distorting.
We strengthened the twist for 6 inch barb pitch, which made barb pitch stable.
We strengthened the twist for 6 inch barb pitch, which made barb pitch stable.
| TSB-8 Specification | ||
| Cord Wire Gauge | 1.50～1.70mm (about T.S. 900 – 1200N/mm2) | |
| Barb Wire Gauge | 1.40 – 1.60mm (about T.S. 400 – 500N/mm2) | |
| No. of twsits between barbs | Approx. 5 twists | |
| Type of Barb | 4-points | |
| Barb pitch | 3, 3.5, 4, 5 inch + 6 inch | |
| No. of barbs per min. (max) | about 230 (at 3, 3.5, 4 inch)about 180 (at 5 inch + 6 inch) | |
| Coil size | O.D | about 425mm |
| I.D | about 110mm | |
| Height | about 210mm | |
| Weight | about 25kg max. | |
| Main motor | AC7.5kw x 4p motor with brake, inverter drive | |
| Winding motor | AC3.7kw x 4p motor, inverter drive by torque control | |
| Machine dimension | 2,730 x 900 x 1,660 (mm) | |
| Machine weight | about 3,000kg | |
Four coils collective type overhead wire supply stand for barbed wire machine
About
This is wire supply stand to feed four wires as barbed wire is consisting of four wires.